Taps UK Blog

Small taps size of the bathroom sink taps at home, should pay attention to rational use of limited home space, shower seems economical and convenient than bathtub, washbasin can be bracket-style, wall space available to do some small closet, mirror boxes, used to place some sporadic items. Hook can be installed on the wall behind the door for hanging items like clothing and headgear.
Shower area can be saved

Shower room is currently selling products on the market comparison. Market is currently a common shower room are: vertical angle: read from the shape of a square, curved, diamond-shaped; the structure is divided into sliding doors, folding doors, pivot doors, etc.; are two ways to enter into or single-sided angle access type, the maximum angle to enter the type is characterized by better use of limited bathroom area and expand the usage.
Toilet attention to a few selected from the bathroom sink taps

Toilet is very particular about the selection, it was thought that as long as the luxury bathroom sink taps tile shape and color match before it. In fact, as the aperture to select the correct type and drainage patterns is more important. Note that a good amount of the nozzle to the center (the water) and the wall distance. Standard for the amount of water placed under the toilet seat mouth of the vertical distance from the center to the wall, and then buy the same type of toilet to “seat on the pitch.”

Bullock U.S. stainless steel taps, shower head series, with its environmental health, fashion, beautiful features, a launch will be favorites.

1, healthy

Currently more than 90% of the world’s shower taps are copper, copper lead (usually lead content of copper and 8%, the market spoke of “lead-free copper” is the “low lead content” means, not really lead-free), easy to grow rust, lead, and verdigris will pollute the water quality of tap water, damage to human health.

Bullock U.S. leader, shower products, all use high-quality 304 stainless steel material, does not rust, lead, leader of the main do not have lead contamination of water sources, will not harm people’s health, give us water to create a healthy life environment.

2, environmental protection

Leading copper plating surface are used, when the sparkling new look, very beautiful, but the wait time will tap the surface of the plating layer of the aging off, generating rust, water pollution not only affects the appearance and therefore they need every three to five years replaced, repeat the purchase of such a serious waste of resources, while production of copper smelting and electroplating are highly toxic gas, waste water, pollution of the environment; copper produced in the polishing process of copper powder, dust, would result in workers seriously affect the health of occupational diseases.

Bullock U.S. stainless steel taps, shower taps in the choice of materials and processes are based on environmental protection for the pilot, in line with modern society, the higher people’s environmental protection requirements. 304 stainless steel anti-corrosion, anti-oxidation, so Bullock U.S. products more durable, can greatly reduce the repeat purchase rate, effectively save resources and reduce duplication of production on a large number of environmental pollution; Bullock Rose’s first U.S. use of surface treatment technical, physical surface treatment, no plating, no environmental pollution, but also to the workers a safe production environment for mankind to reduce pollution, protect the living environment contributed to a force.

3, beautiful

Leading off the copper plating layer and the rust seriously affect the appearance.
Bullock U.S. stainless steel faucet,  shower taps products using Rose’s first surface treatment technology, texture more delicate, more clearly showing the appearance of stainless steel its luster, more elegant and luxurious, and the life time grows new.

4, easy to clean

The rapid development of today’s world, people are increasingly fast pace of work, the requirements of life also change. Bullock U.S. stainless steel faucet, shower easy care, clean, just gently wipe can bright as new, suitable for fast-paced modern society, people under the diversified requirements of household goods.

With the rapid development of China’s economic level, people have increasing demand for quality of life of kitchen and bathroom products are also greatly improved the understanding, in the pursuit of innovative design, functional and at the same time, health, environmental awareness is gradually strengthened. Bullock U.S. stainless steel faucet, shower beautiful stylish, functional human, not only gives consumers an extraordinary kitchen and bath water to enjoy healthy, better for the environment gave a soft power, has started to become a new consumer fashion. shower taps

“Green decoration brand” not credible taps

Online search has become a popular mode of consumption. Some home improvement company in the field not only played “green decoration brand” of the title, but also spared no effort to beautify the company’s image on the network. bathroom sink taps

Industry environmental experts pointed out that the Shanghai Environmental Protection decoration brand had been carried out in any type of list draft recommendation, Consumers do not be so-called “first” fool.

“Environmental control standards for a full refund” is ambiguous bathroom sink taps

Since the home improvement building materials used during renovation or purchase of non-green furniture, non-green throat caused discomfort, skin irritation and other serious cause of human central nervous system, liver, kidney and blood poisoning, and even pregnant women, abortion is not uncommon. In this regard, home improvement has attracted widespread attention and vigilance.

That have not been received environmental certification authority home improvement company advertised – “environmental control standards for a full refund” was in fact attract more business as a means of decoration only.

Industry environmental experts pointed out that the first “green test failed” is what type of testing, vague and impossible to define, can not operate; Secondly, the “full refund” is a contract in full? What kind of individual or full? Easily lead to an eventual dispute herein ambiguity, so that consumers have trouble in the post-consumer.

Green Certificates often “Li Gui” bathroom sink taps

Indoor air pollution has been included in the greatest public health risks of environmental pollution factor of 5 can not be ignored. In the home improvement 7 days after completion of the provisions of the interior decoration industry, air testing, a useful assessment of the suitability of the importance of living criteria. Environmental Protection Agency as environmentally friendly green home construction is still in the study selection criteria, the market, many home improvement company, even Sike “green home green construction techniques recommended units,” the word bronze, openly hanging in the store front and business websites Recommended certificate of qualification place to trick consumers fooled.

People on new ideas of modern high degree of activity, the rapid development of the times. Research and development of sanitary ware, also put together studies of human behavior, advanced features, attractive appearance, fully embodies the humanist endless stream of sanitary ware. taps

Smart technology into the bathroom taps

Smart Toilet to smart bath, smart bathroom taps product development progress. Installation of infrared sensors with automatic drain leading out of the function of liquid soap; voice of the shower nozzle to adjust the temperature according to oral instructions, or water spray; toilet seat with warm water, warm air drying, take the ring heating, automatic anti-fouling deodorant and many other functions … …

Infrared sensor technology is widely used in water control, water control. Control with infrared sensing water bath or toilet, you can adjust the massage based on preferences or toilet water hole water hole interval, and grasp the rhythm and intensity of water flow.

Bathroom home beauty salon

As long as the economic strength of the license, you can make a beauty salon and hospital equipment moved into the bathroom taps, try to make every detail of the bathroom have become a health props: cozy and comfortable jacuzzi, sauna room, sauna room is not longer a luxury; advanced ceramics with nano-technology makes the antibacterial function; even the toilet has become able to check the body’s advanced equipment.

What we refuse to be a bathroom in the house most comfortable SPA, or do a general health check it?

Shaped design of transparent

Bath is a house can best embody the qualities of the parts. This year appeared completely transparent bathtubs, vanities, shape varied and there are semi-circular, triangular, pentagonal, petal-shaped or 1 / 4 round, the bathroom is no longer just white and bone color, but is full of colorful fun.

Everywhere the new water-saving faucet

The word “water” under the banner of a sensor head, the hand into the water on the hands stop moving water, and checking the water tap fees for this time to remove; also temperature leading to the water temperature in the factory made a pre-conditioners, making the leading In the gently twist open, immediately to the pleasant flow of water and appropriate water, waste control from the outset to a minimum. The leader of the structure is very accurate, able to automatically and continuously compensate for water pressure, water temperature, water temperature can reach the user’s instantaneous temperature requirements, and temperature control within 0.5 ℃, thus further reducing water waste.

As for the water-saving toilet, straight style for everyone saving trust siphon bold innovation, the introduction of the jet both quiet and water siphon. Some manufacturers are not satisfied with 3 / 6 liters of water flow switch, introduced a 4-liter water-saving sanitary ware, consumer reflects very well, and even waterless urinals, saving the water is simply to zero.

Tap covert magic

Have you ever seen water injected into bath tub from the ceiling? Seen hidden in the wall of the tap it? Seen the toilet tank can not see it? In fact, the bath room for so many unexpected changes occur, this year’s wares concealed Many consumers have become the object of fans.

Wall-type faucet that can be hidden in the ceiling or side wall of the bathtub, the spout and drip tray of two parts, do not know people still thought it was a fine mosaic decorations on the walls above the tub. Touch switch, water miraculously poured out from the wall, crystal clear and full water column. If you install this faucet in the bathroom ceiling, the water column can also be injected into the ceiling like rain from the bathtub. The concealed toilet tank and hang, allowing bathroom has the best space utilization, more concise spacious. bathroom taps

The invention of writing intelligent and mysterious, people think Ware is also the human side.

If you are not a plumber do you read the shower taps replacement of one of their own information. Contrary to popular belief replace the shower faucet is not a difficult task. It can be very simple, as long as you follow the correct steps.

There are many kinds of shower taps in the markets. Some of washer-type faucet, and some are less laundry. There are different reasons why you need to replace the shower faucet. Washing machine may have wear, corrosion or the problem may be dry seat in the washing machine and cartridges. No matter may be related to the work can be completed in an instant set of tools, the right reasons.

To replace the washer-type taps shut down the whole house water supply. Then remove the faucet handle turning the screw clockwise. It can be done with the help of screw drivers. Then, remove the stem and check the thread. If they rust or wear, and then take them to a retailer. If the dry cleaning dirty. If the corrosion of brass screws can replace them. Take a look at the washer seat. If they are worn out, you can reface the seat of clothing they use tools. Because the tap a variety of shapes and sizes remember to install the correct tap washers. Some stems use O ring. In this case, replace the ring.

If it is a noisy taps the problem may be in the washer. In this case, remove, and tighten the faucet gasket. Taps may be due to poor design and construction noise issues. When the thread of the body back to try to move the stem dry taps up and down. If it moves, then the leader may have to be replaced.

No taps in the washing machine, you will need to replace the working parts. Pre-packed bags available. Just follow the instructions carefully.

Diaphragm washer tap taps similar. Here, instead of washing machines, you will have a disc. To replace these, you need to remove the handle and dry. If the rubber diaphragm can not dry out, may be still inside the faucet. In this case, use pliers to peel it from the tap. Then replace the disc around the diaphragm.

Tap in the ball will have a ball inside the control hot and cold water. Ring strain due to handling the possibility of leakage. In this case, you will have to replace all the working parts of faucets. You may need the help of wrench or hex wrench. If the ball is the size you need for cleaning coating.

The cartridge shower taps, you will need to remove the handle. Then there will be a swing spout, need to be removed. Use a screwdriver to remove the clip, and then cartridge can be pulled with pliers help. Although the replacement ink cartridges, the use of silicone oil lubrication cartridges.

Basin Mixer

1. Can not connect the inlet taps

(1) suggested the use of triangular valve Genuine Parts purchase error

(2) triangle valve mounting position over the length of pipe leading into the triangular valve 350MM elevation (elevation of tubes) or use original accessories waterfall taps

(3) the length of the inlet valve position over a triangular cut short into the water to the appropriate location

2. Basin where no storage

(1) basin water contact area not sealed and water removal of water in the basin area in contact with silica gel (using neutral, mildew) Seal

(2) Plug the incorrect adjustment screw plug head from under the screw length waterfall taps

3. The size of the water can not be installed into the water basin drain size is inconsistent with the selection of original accessories

4.waterfall taps Can not trap water bath connected to adopt the European standard Raisin buy straight into the water, or use the European standard trap

5. The water off chrome layer may be in a neutral acidic silicone mold silicone seal is recommended

Use of functional and structural characteristics

At present, tap the market for home use product variety, everything. However, no matter how many species, generally can be distinguished in two ways. To use the function, the sensor taps can be divided into tub faucets taps, basin faucets, kitchen taps three, by the configuration of different personal preferences and ways to achieve the desired effects consistent. According to the terms of structural characteristics, can be divided into single-handle taps Ceramic valve core and 90 ° switch tap and spiral stability of three types of jack-up rubber spout.

The former two types of industrial ceramic products are processed by a special plane to achieve on and off water. Then a class of products in the current market trend have been phased out. The key is that the former two types of products are easy to operate, the advantages of flexibility, the structure of existing products, the most popular. Meanwhile, imports have been in thermostat settings or infrared light-sensitive products and opening and closing of water control products.

2, the nozzle surface and the coating of choice

Had been present the sensor faucet tap many kinds of surface coating of its products, select the focus is on personal preference and based on consumer demand and the overall interior decoration matching. Consumers were advised to select those in the processing technology on more mature products, that is, the more common use of the existing chrome, which we usually title “clomiphene” products. The process has been a few years of experience, quality, more reliable.

3, the quality of the identification of Tap

Should be in the rotation or toggle handle lightweight, flexible, sense of no obstruction, there is jamming of the nozzle are generally more or less sense of a quality problem, or improper assembly, improper, or debugging, and some may even be zero by the poor Part assembled. Usually tap water before switching on can not identify whether there is leakage, but the basic you can check whether the loose movement of the joints to achieve their goals. Because this may lead to tap loose the direct cause of leakage.

People generally do not like the kind of obvious defects in the product surface, not the exception to the nozzle. It should be noted that the tap tap the surface with or without induction of poor quality due to the formation of plating burrs, anxious point, some of the parts without coating, whether due to poor casting quality such as the formation of pores and spots. Most enterprises in order to protect their own reputation in the product and its packaging will be marked with clear and reliable identification. Some doubt the credibility of the enterprise poor or not, do not want their products in the packaging of the above and related standards clear and reliable indicators. Recommended not to buy such products, even if their prices very cheap.sensor taps

1, taps intelligent water-saving: Automatic sensor taps control on, off, hand or water containers, cleaning materials stretching sensing range, an automatic water faucet, left after the water stop, water features significantly.

2, overtime protection: 30 seconds Auto shut-out washing water features, avoid prolonged foreign body resulting in waste of water resources within the sensing range. sensor taps

3, to facilitate health: water entirely by the sensor switch automatically, without access to tap the manpower to effectively prevent bacterial cross-infection. sensor taps

4, Smart power: the use of modern digital technology, ultra-low power (DC-type product 4 5 alkaline batteries, static current ≤ 60μA).

5, adaptable: use of the environment can be adjusted according to different sensor sensitivity (range).

6, the production process: casting of brass, chrome plated, forever shine; streamline design, modern and strong.

7, easy maintenance: built-in filter to avoid impurities affect the normal work flow solenoid valve, and easy to clean.

8, the weak Tip: DC products with battery replacement reminder function, battery power is low, the indicator light is lit, prompting the timely replacement of batteries.

9, Applications: hotels, hotels, office buildings, airports, medical institutions and other public places.

Since no automatic sensor faucet direct contact with the body, which can effectively prevent bacterial cross-infection; hand to runoff, leaving to turn off the feature, effectively more than 60% water saving, especially for areas of serious water shortage. Automatic sensor faucets now widely used in intensive flow of people train and bus stations, airports, hospitals and other public places.sensor taps

1, taps the sensor window, indicator light, no water: first check whether the disruption of water supply, if not, open the valve for cleaning house, including mold pieces, springs, moving core and the solenoid valve chamber, and then stood back in, install the attention the location of the drainage hole, hand on the sensor faucet sensor distance, did not work if the solenoid valve spool to replace the solenoid valve coil.

2, sensor taps window indicator does not light, often water: Check the power supply is normal and the power cord is bad, if the power supply is normal, after adjusting sensing distance (long sensing distance adjustment clockwise, counterclockwise transfer short), hand on the sensor distance sensor faucet, the light is not lit, replace the sensor probe.

3, indicator light sensor window, often water: First, check whether there are impurities in water-side plug, clean the filter in a timely manner and then as is replacing the impurity, and if not, hand on the sensor faucet sensor distance, carefully listening to the electromagnetic valve Core is working (with the sound on and off, so if there is work to disassemble for cleaning the internal diaphragm solenoid valve, spring, moving core and the solenoid valve chamber, and as is loaded back. If it still often water, replace solenoid valve coil. sensor taps

4, no one has automatic water sensor: First, check whether the sensor window surface of a foreign body, and whether the induction of a foreign body in front of the window Picks block, if there are foreign bodies, clean the sensor window, if the front of the foreign body in the sensing range, sensing distance adjustable short or re-installation; can not be solved if both the front, then it is the infrared interference reduced ability to produce error sensors, infrared road section should be replaced.sensor taps

First, sensor tap works:

By the infrared sensor taps reflection principle, when the body of the hand on the faucet in the infrared region, infrared emission control for infrared Picks of the human hand to block reflection infrared receiver tube, the microcomputer integrated circuit after the signal sent to the pulse solenoid valve, solenoid valve signal received by the specified command to open valve to control the tap water; when the body left the hands of the scope of the infrared sensor, solenoid valve not receiving signal, the solenoid valve spool is reset by an internal spring to control the tap The off the water.

Second, sensor taps life applications:

As the body without direct contact sensor taps, which can effectively prevent bacterial cross-infection; reach out to incoming water, leave to turn off the feature, effectively more than 30% water saving, especially for areas of serious water shortage. Universal application of the current sensor taps flow of people-intensive train and bus stations, airports, hospitals and other public places.

Third, sensor taps common faults:

1, there are sensors (light on) no water: open the solenoid valve for cleaning house, and then stood back in hand sensors, if the solenoid valve spool not working (opening and opening and closing) of the voice, to replace the solenoid valve coil

2, no induction (light is not lit) regular water: Check the power supply is normal, if normal power supply, hand sensors, the indicator does not light, replace the sensor probe.

3, sensor taps with sensor (indicator light) often flow: First, check whether there are impurities in water at the blockage, if not, upon induction by hand, carefully listening to the solenoid valve spool is working (with the sound on and off, if there work, the internal solenoid valve to open for cleaning, and as is loaded back.